WD 6TB Red 5400 rpm SATA III 3.5″ Internal NAS HDD (WD60EFAX)The 6TB Red 5400 rpm SATA III 3.5″ Internal NAS HDD Retail Kit from WD is a mainstream option for SoHo (Small Office and Home Office) applications in 1- to 8-bay systems with load to moderate workloads and extended idle times, excluding ZFS. Engineered to handle increased workloads, this 6TB drive operates using a SATA III 6 Gb/s interface, a 256MB cache, and a rotational speed of 5400 rpm, all of which help to ensure uninterrupted data transfers with a sustained rate of up to 180 MB/s. This drive also features high levels of reliability, with 600,000 load/unload cycles, <1 in 1014 non-recoverable read errors per bits read, error recovery controls, and 1,000,000 hours MTBF for 1-8 bay NAS systems. Also built into this drive are noise and vibration protection and WD’s NASware 3.0 helps increase system compatibility, allowing WD Red drives to be more easily integrated with your existing network infrastructure.General FeaturesFill Your NAS with WD RedBuilt for 1 to 8-bay NAS systems, WD Red lets users store their data in one unitNASware 3.0 TechnologyBuilt into every WD Red hard drive, NASware 3.0’s technology helps improves your system’s storage performance by increasing compatibility, integration, upgradeability, and reliabilityBuilt for NAS CompatibilityDesktop drives aren’t purpose-built for NAS, but WD Red drives with NASware are. WD’s technology helps takes the guesswork out of selecting a drive. WD Red is for small NAS systems and WD’s algorithm balances performance and reliability in NAS and RAID environmentsDesktop Drives vs. WD RedDesktop hard drives are not designed for NAS environments. Do right by your NAS and choose a drive with an array of features to help preserve your data and maintain optimum performance. Take the following into consideration when choosing a hard drive for your NAS:Compatibility: Without being tested for compatibility with your NAS system, improved performance is not guaranteedReliability: The always-on environment of a NAS or RAID is a hot one and desktop drives aren’t typically tested in those conditions. WD Red isError Recovery Controls: WD Red NAS hard drives are specifically designed with RAID error recovery control to help reduce failures within the NAS system. Desktop drives are not typically designed for RAID environments where this can be an issueNoise and Vibration Protection: Designed to operate solo, desktop drives offer little or no protection from the noise and vibration faced in a multi-drive system. WD Red drives are designed for multi-bay NAS systemsWD Red for HomeStream, backup, share, and organize your digital content at home with a NAS and WD Red drives designed to share content to the devices in your home. Red NASware helps increase your drives’ compatibility with your devices, TV, stereo, and moreWD Red for Small BusinessWD Red is a good hard drive choice for 1 to 8 bay systems. NASware 3.0 allows for integration with your existing network so WD Red can share and backup files at the speed of your business. For larger businesses with up to 16 bays, use WD Red Pro3D Active Balance PlusThis helps ensure your data is protected from excessive vibration and noise in a NAS or RAID environment. This dual-plane balance control helps reduce the degradation of your drive over timeReliabilitySince your NAS system is always on, a reliable drive is essential. With an MTBF of up to 1 million hours, the WD Red drive with NASware 3.0 is designed for 24×7 environmentsCooler OperationsBy reducing power consumption, the operating temperature of your NAS stays cooler. With a lower temperature in your system, you can create a more reliable solution for your NAS
